Horita SCT-50 Serial Control Titler
Requirements/Configuration:
1. SCT-50 (firmware version SCT330).
2. The IPS will broadcast ID 00, to all available SCT-50 units.
3. The IPS serial port must be set to match the SCT-50 baud rate (default 9600, [4800 or 38400]. See IPS menu SETUP->Communications.
4. IPS configures the text in white over a black background.
5. IPS configures the SCT-50 real time clock to a 24 hour format hh:mm:ss.
7. The target latitude and depth are displayed on the top line (top of video display). The units of the target depth with be meters if the IPS system units are set to meters units otherwise the depth units will be in feet. See VIEW->Display Settings ->System .
8. The target longitude and the SCT-50 real time clock are displayed directly below the target latitude and depth.