Survey Lines
Allows the user to create survey lines for navigational use. The user must enter a valid start and end waypoint. Please see the Waypoint List Window or Cursor Waypoint Activated section of this manual for more information.
Two unique waypoints must be selected for the survey lines feature to be used and the selected waypoints must be at least 1.0 meters apart.
Start Waypoint:
selects the beginning waypoint used to create the survey lines. Click the arrow on the right of the combo box and a list box with all the waypoints will be displayed. The waypoint number will be displayed at the far left of the list box entry, followed by the waypoint latitude, longitude and memo. To select a waypoint use the mouse or the arrow key to scroll through the list of waypoints. Then either mouse click on the waypoint or hit the enter key to choose a waypoint.
End Waypoint:
selects the end waypoint used to create the survey lines.
Spacing:
sets the space in meters between each line. The maximum allowed space between the survey lines is 5000.00, the minimum is 1.00 and the IPS default is 25.0 meters.
Number of Lines:
sets the number of survey lines. The maximum number of lines allowed is 100, the minimum is 1 and the IPS default is 10.
Directions:
allows the user to select whether the survey lines will be to the left or right of the waypoints. The IPS default is left.